Room-Temperature Formaldehyde Removal
24h formaldehyde removal ≥95%, with continuous purification reaching ≥99% without heating or light.
Bamboo-Based Formaldehyde Purification Material
FC-01 Carbon-Based Formaldehyde Purification Catalyst
Long-life formaldehyde purification material for air purification equipment and industrial air treatment.
24h formaldehyde removal ≥95%, continuous purification ≥99%, room-temperature catalysis, service life ≥6 months.
High Surface Area Adsorption
BET surface area ≥1100 m²/g for fast adsorption and enrichment of formaldehyde molecules.
Adsorption + Catalytic Decomposition
Patented composite modification technology enables continuous adsorption and catalytic conversion of formaldehyde.
Long-Term Stable Purification
Service life ≥6 months, suitable for long-term operation in air purification equipment.
Overview
FC-01 is a functional carbon-based formaldehyde purification material developed for air purifiers, fresh air systems, automotive filtration modules and industrial formaldehyde gas treatment.
The product uses modified bamboo-based activated carbon as a porous carrier and combines it with catalytic active components. Its high surface area and developed pore structure rapidly adsorb formaldehyde, while the active sites continuously catalyze its decomposition at room temperature.
FC-01 provides 24h formaldehyde removal ≥95%, with continuous purification reaching ≥99%, a BET surface area of ≥1100 m²/g, and a service life of 6 months or more. Compared with conventional adsorption-only activated carbon, it helps reduce formaldehyde re-release after adsorption saturation and is better suited for long-term purification systems.
Applications
Technical Specifications
PropertyTypical Value
Physical Properties
AppearanceBlack pellets
SizeΦ2–4 mm
Bulk Density450 ± 50 g/L
Performance
24h Formaldehyde Removal Rate≥95%
Iodine Value≥1000 mg/g
BET Surface Area≥1100 m²/g
Total Pore Volume≥0.5 cm³/g
Crush Strength≥80 N/cm
Service Life≥6 months*
Operating Conditions
Temperature0–50°C
Recommended Temperature15–35°C
Relative Humidity30–80% RH
Formaldehyde Concentration≤10 ppm*
FAQ
What is the difference between FC-01 and conventional activated carbon?
Conventional activated carbon mainly removes formaldehyde by physical adsorption, so its capacity is limited by pore saturation.
FC-01 combines high-surface-area bamboo-based carbon with catalytic active components, enabling both adsorption and continuous catalytic decomposition of formaldehyde.
What equipment can FC-01 be used in?
Why is the formaldehyde removal rate 95% in 24 hours, but 99% with continuous purification?
Under standard test conditions, FC-01 achieves ≥95% formaldehyde removal within 24 hours.
As purification continues, adsorption and catalytic decomposition proceed continuously, allowing the overall removal rate to reach ≥99%.
Actual performance depends on concentration, airflow, loading quantity, temperature, humidity and contact time.
How long is the service life?
Under typical operating conditions, FC-01 has a service life of 6 months or more.
Actual service life depends on inlet formaldehyde concentration, airflow, temperature, humidity, loading quantity and operating time.
Can FC-01 treat high-concentration formaldehyde gas?
FC-01 can be applied to industrial formaldehyde gas treatment. For high-concentration or high-flow applications, media loading and system design should be evaluated according to actual operating conditions.
For such projects, material selection and loading recommendations can be provided.
Are samples available for testing?
Yes. Samples can be provided for performance testing and application validation.
For equipment manufacturers and industrial users, material selection can be matched according to formaldehyde concentration, airflow, equipment size and target removal efficiency.
